Olivetti d-Copia 5200MF Service Manual page 246

6. Remove two screws and two connectors,
and then remove the fan duct.
7. Remove six screws and remove the toner
container retainer.
8. Remove two pins, two springs, one screw
and one connector.
9. Remove the laser scanner unit.
10. Replace the laser scanner unit and install
the unit.
11. Refit the toner container retainer, fan duct
and inner cover.
12. Refit the top tray, front right cover, right
lower cover and front left cover.
13. Refit the drum unit and the developing unit.
Y111960-2
Fan duct
Screw
Toner container retainer
Screw
Connector
Service Manual
Connectors
Screw
Figure 1-5-46
Screw
Screw
Screw
Screws
Figure 1-5-47
Pin Pin
Spring
Spring
Screw
Laser scanner unit
Figure 1-5-48
2KR/2KS
1-5-23