Olivetti d-Copia 5200MF Service Manual page 180

Problem
(46)
A paper jam in fin-
isher is indicated dur-
ing copying (paper
conveying sensor
jam).
Jam code 95
(47)
A paper jam in built-
in finisher is indicated
during copying (jam
between finisher and
machine).
Jam code 96
Y111960-2
Causes/check procedures
Defective paper conveying
sensor.
Check if the paper convey-
ing motor malfunctions.
Check if the paper convey-
ing roller and paper convey-
ing pulley contact each
other.
Check if the paper convey-
ing guide is deformed.
Defective finisher main
PWB.
Defective intermediate tray
sensor.
Corrective measures
With 5 V DC present at CN9-1 on the finisher main PWB, check if
CN9-3 on the finisher main PWB remains low or high when the
paper conveying sensor is turned on and off. If it does, replace the
paper conveying sensor.
Check.
Check and remedy.
Check and remedy.
Replace the finisher main PWB and check for correct operation.
With 5 V DC present at YC3-1 on the finisher control PWB, check
if YC3-2 on the finisher control PWB remains low or high when the
intermediate tray sensor is turned on and off. If it does, replace the
intermediate tray sensor.
Service Manual
2KR/2KS
1-4-23