2KR/2KS
1-5-3
Optical section
(1) Detaching and refitting the exposure lamp
Replace the exposure lamp as follows.
Procedure
1. Remove the original cover or the DP.
2. Remove the ISU filter cover.
3. Remove ten screws and then remove the
rear cover.
4. Remove the clip holder.
5. Open the front cover and left cover 1.
6. Remove four screws and remove front left
cover.
1-5-12
Screw
Screws
Service Manual
ISU filter cover
D P
Screws
A 2
B 1
O P
T 1
Screws
Figure 1-5-26
Clip holder
Front left cover
Figure 1-5-27
Screws
Screw
Rear cover
Screw
Y111960-2