Olivetti d-Copia 5200MF Service Manual page 143

2KR/2KS
Maintenance
item No.
HDD scandisk
U989
Description
Restores data in the hard disk by scanning the disk.
Purpose
If power is turned off while accessing to the hard disk is performed, the control information in the hard disk
drive may be damaged. Use this mode to restore the data.
Method
1. Press the start key.
2. Press [EXECUTE].
3. Press the start key. When scanning of the disk is complete, the execution result is displayed.
4. Turn the main power switch off and on.
Checking/clearing the time for the exposure lamp to light
U990
Description
Displays, clears or changes the accumulated time for the CIS to light.
Purpose
To check duration of use of the CIS. Also to clear the accumulated time for the CIS after replacement.
Method
1. Press the start key.
The accumulated time of illumination for the CIS is displayed in minutes.
2. Clear the accumulated time using the +/- or numeric keys.
3. Press the start key. The time is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Checking the scanner count
U991
Description
Displays the scanner operation count.
Purpose
To check the status of use of the scanner.
Method
1. Press the start key.
Display
COPY SCAN COUNT
FAX SCAN COUNT
OTHER SCAN COUNT
Completion
Press the stop key. The screen for selecting a maintenance No. item is displayed.
1-3-106
Description
Description
Scanner operation count for copying
Scanner operation count for fax
Scanner operation count except for copying
Service Manual Y111960-2