5. Remove two cable clamps.
6. Pressing the lock lever and remove the fol-
lowing connectors.
Connector (Blue)
Connector (Black)
7. Remove the power source connector.
8. Remove two screws and then remove the
hard disk mount assembly.
Y111960-2
Connector (Black)
D P
Connector
Cable clamp
Service Manual
Connector (Blue)
Power source
connector
Lock lever
Figure 1-5-80
mount assembly
Figure 1-5-81
2KR/2KS
Cable
clamps
Screws
Hard disk
1-5-41