Olivetti d-Copia 5200MF Service Manual page 148

JPEG/TIFF Print
1. Press cursor down key, [Next] of Function Defaults,
cursor down key twice and then [Change] of JPEG/
TIFF Print.
2. Select the default for [Fit to Paper Size], [Image
Resolution], or [Fit to Print Resolution].
3. Press [OK].
XPS Fit to Page
1. Press cursor down key, [Next] of Function Defaults,
cursor down key twice and then [Change] of XPS
Fit to Page.
2. Select [Off] or [On] for the default.
3. Press [OK].
(3) Copy Settings
Paper Selection
1. Press [Change] of Paper Selection.
2. Press [Auto] or [Default Paper Source].
3. Press [OK].
Auto Paper Selection
1. Press [Change] of Auto Paper Selection.
2. Press [Most Suitable Size] or [Same as Original
Size].
3. Press [OK].
Auto % Priority
1. Press [Change] of Auto % Priority.
2. Select the default for [Off] or [On].
3. Press [OK].
Reserve Next Priority
1. Press [Change] of Reserve Next Priority.
2. Select the default for [Off] or [On].
3. Press [OK].
Preset Limit
1. Press [Change] of Preset Limit.
2. Press [+] or [-] or use the numeric keys to enter the
limit for the number of copies.
3. Press [OK].
Quick Setup Registration
1. Press [Next] of Quick Setup Registration.
2. Press [Change] of the function to be registered in
Quick Setup.
3. Select a key (1-6) allocated on the Quick Setup
Registration screen. Press [Off] to delete a key
from the Quick Setup.
4. Press [OK]. If you overwrite the setting, a confirma-
tion screen appears. Press [Yes].
Y111960-2
(4) Sending Settings
Quick Setup Registration
1. Press [Next] of Quick Setup Registration.
2. Press [Change] of the function to be registered in
Quick Setup.
3. Select a key (1-6) allocated on the Quick Setup
Registration screen. Press [Off] to delete a key
from the Quick Setup.
4. Press [OK]. If you overwrite the setting, a confirma-
tion screen appears. Press [Yes].
Destination Check before Send
1. Press [Change] of Dest. Check before Send.
2. Select [Off] or [On].
3. Press [OK].
Color Type
1. Press [Change] of Color Type.
2. Select [RGB] or [sRGB].
3. Press [OK].
Entry Check for New Destination
1. Press [Change] of Entry Check for New Dest.
2. Select [Off] or [On].
3. Press [OK].
Setting the Default Send Screen
1. Press [Change] of Default Screen.
2. Press [Destination] or [Address Book].
3. Press [OK].
(5) Document Box Settings
Quick Setup Registration
1. Press [Next] of Quick Setup Registration.
2. Press [Next] of Store File or Send.
3. Press [Change] of the function to be registered in
Quick Setup.
4. Select a key (1-6) allocated on the Quick Setup
screen. Press [Off] to delete a key from the Quick
Setup.
5. Press [OK]. If you overwrite the setting, a confirma-
tion screen appears. Press [Yes].
Service Manual
2KR/2KS
1-3-111