Olivetti d-Copia 5200MF Service Manual page 106

Maintenance
item No.
Setting: Adjustment of front and back stapling home position
U246
1. Select [STAPLE HP ADJ].
2. Change the setting using the +/- or numeric keys.
Description
Adjustment of front and back stapling home position -10 to 10
When staple positions are off toward the front side of the machine (sample 1), increase the preset value.
When staple positions are off toward the rear side of the machine (sample 2), decrease the preset value.
3. Press the start key. The value is set.
Setting: Adjustment of slanted stapling home position
1. Select [TURNED STAPLE HP ADJ].
2. Change the setting using the +/- or numeric keys.
Description
Adjustment of slanted stapling home position
To increase the angle for slanted stapling (sample 1), decrease the preset value. To decrease the angle
for slanted stapling (sample 2), increase the preset value.
3. Press the start key. The value is set.
Y111960-2
Description
Sample 1
Figure 1-3-20
Sample 1
Figure 1-3-21
Service Manual
Setting Initial
range setting
0
Sample 2
Setting Initial
range setting
-10 to 10 0
Sample 2
2KR/2KS
Change in
value per step
0.32 mm
Change in
value per step
°
0.99
1-3-69