Olivetti d-Copia 5200MF Service Manual page 107

2KR/2KS
Maintenance
item No.
Setting: [BOOKLET FOLDER]
U246
1. Select the item to be set.
Display
WIDTH U HP ADJ
WIDTH L HP ADJ
STAPLE POS ADJ (A4R/LTR)
STAPLE POS ADJ (B4R/LGR)
STAPLE POS ADJ (A3/LD)
SADDLE POS ADJ (A4R/LTR)
SADDLE POS ADJ (B4R/LGR) Adjustment of center folding position for B4/Legal size
SADDLE POS ADJ (A3/LD)
Setting: Adjustment of upper/lower side registration home position
1. Select [WIDTH U HP ADJ] or [WIDTH L HP ADJ].
2. Change the setting using the +/- or numeric keys.
Description
Adjustment of upper side registration home position
Adjustment of lower side registration home position
3. Press the start key. The value is set.
4. Press the stop key. The screen for selecting a maintenance item No. is displayed.
5. Enter maintenance mode U240 and select [BOOKLET], then [WIDTH TEST(A3)].
The width guides of the centerfold unit will move to A3-size position.
6. Pull the centerfold unit, insert paper between the guides and check that paper is abut the guides.
7. Repeat the above adjustment until paper is properly in position.
Setting: Adjustment of booklet stapling position
1. Select [STAPLE POS ADJ (A4R/LTR)], [STAPLE POS ADJ (B4R/LGR)] or [STAPLE POS ADJ (A3/LD)].
2. Change the setting using the +/- or numeric keys.
Description
Adjustment of booklet stapling position for A4/Letter size
Adjustment of booklet stapling position for B4/Legal size
Adjustment of booklet stapling position for A3/Ledger size
When staples are placed too far right (sample 1), decrease the preset value. When staples are placed
too far left (sample 2), increase the preset value.
Reference value: within
3. Press the start key. The value is set.
1-3-70
Description
Description
Adjustment of upper side registration home position
Adjustment of lower side registration home position
Adjustment of booklet stapling position for A4/Letter size
Adjustment of booklet stapling position for B4/Legal size
Adjustment of booklet stapling position for A3/Ledger size
Adjustment of center folding position for A4/Letter size
Adjustment of center folding position for A3/Ledger size
±
2 mm
2 mm
Sample 1
Figure 1-3-22
Service Manual
Setting Initial
range setting
-20 to 20 0
-46 to 46 0
Setting Initial
range setting
-10 to 10 0
-10 to 10 0
-10 to 10 0
2 mm
Sample 2
Change in
value per step
0.104 mm
0.104 mm
Change in
value per step
0.55 mm
0.55 mm
0.55 mm
Y111960-2