Olivetti d-Copia 5200MF Service Manual page 132

Maintenance
item No.
Setting the enterprise mode
U510
Description
Sets whether or not the enterprise mode setting is enabled.
This maintenance mode is effective for only 120 V specifications.
Purpose
According to user request, changes the setting.
Setting
1. Press the start key.
2. Select [MODE1].
3. Select the item.
Display
ON
OFF
INSTALL
Initial setting: ON (Inch specifications)/OFF (Metric specifications)
4. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Checking/clearing copy counts by paper feed locations
U901
Description
Displays or clears copy counts by paper feed locations.
Purpose
To check the time to replace consumable parts. Also to clear the counts after replacing the consumable parts.
Method
1. Press the start key. The counts by paper feed locations are displayed.
Display
MP TRAY
CASETTE 1
CASETTE 2
CASETTE 3
CASETTE 4
DUPLEX
LCF
When an optional paper feed device is not installed, the corresponding count is not displayed.
Clearing
1. Select the counts to be cleared.
CASETTE 3, CASETTE 4 and LCF cannot be cleared.
2. Select the counts for all and press [ALL CLEAR].
3. Press the start key. The counts is cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Y111960-2
Description
Description
Enterprise mode setting is enabled
Enterprise mode setting is disabled
Executing the install
Description
MP tray
Cassette 1
Cassette 2
Cassette 3 (optional paper feeder)
Cassette 4 (optional paper feeder)
Duplex unit
Optional 3000-sheet paper feeder
Service Manual
2KR/2KS
1-3-95