Table of Contents
Advertisement
Section
Description
Finisher
91
Finisher cover open
93
Reverse sensor jam
(document finisher
only)
94
Paper entry sensor
stay/remaining jam
(document finisher
only)
95
Paper conveying sen-
sor jam (document fin-
isher only)
96
Jam between the built-
in finisher and machine
(built-in finisher only)
Y111960-2
Conditions
(3000-sheet document finisher)
The front cover, top cover or right sub tray is opened when
starting the finisher operation.
The centerfold unit top cover is opened when starting the
center-fold operation.
The mailbox cover is opened when starting the operation.
(Document finisher)
The finisher cover becomes open during paper is running.
Paper is remaining in paths at power on.
The reverse sensor (SBS) does not turn on within specified
time of paper entry sensor (PES) turning on (unfinished
reversing canceled).
The reverse sensor (SBS) is not turned on within specified
time (unfinished reversing set).
The reverse sensor (SBS) is not turned off within specified
time its turning on (resident reversing canceled).
The reverse sensor (SBS) is not turned off within specified
time its turning on (resident reversing set).
The paper entry sensor (PES) is not turned off within speci-
fied time its turning on.
The paper conveying sensor (PCS) is not turned off within
specified time its turning on (reversing canceled).
The paper conveying sensor (PCS) is not turned off within
specified time its turning on (reversing set).
Paper ejection is not output from the machine to the docu-
ment finisher within specified time of the intermediate tray
sensor (ITS) turning on.
Service Manual
2KR/2KS
Specified time
-
-
402 ms
431 ms
1680 ms
700 ms
1260 ms
1260 ms
656 ms
1217 ms
1-4-11
Hide quick links:
Advertisement
Table of Contents
