Olivetti d-Copia 5200MF Service Manual page 79

2KR/2KS
Maintenance
item No.
Setting the exposure density gradient
U093
Description
Changes the exposure density gradient in the manual density mode, depending on respective image quality
modes.
Purpose
To set how the image density is altered by a change of one step in the manual density adjustment for respec-
tive image quality modes. Also used to make copy images darker or lighter.
Method
1. Press the start key.
2. Select the image quality mode. The setting screen for the selected item is displayed.
Display
TEXT
MIXED
OTHER
FAX TEXT
FAX PHOTO
Setting: [TEXT]
1. Select the item to be set.
2. Adjust the setting using the +/- or numeric keys.
Display
TEXT DARKER
TEXT LIGHTER
Increasing the setting makes the change in density larger, and decreasing it makes the change smaller.
3. Press the start key. The value is set.
Setting: [MIXED]
1. Select the item to be set.
2. Adjust the setting using the +/- or numeric keys.
Display
MIXED DARKER
MIXED LIGHTER
Increasing the setting makes the change in density larger, and decreasing it makes the change smaller.
3. Press the start key. The value is set.
1-3-42
Description
Density in the text mode
Density in the text and photo mode
Density in modes other than the text mode or the text and photo mode
Density in the text in fax mode
Density in the photo in fax mode
Description
Change in density when manual density is set dark 0 to 3
Change in density when manual density is set light 0 to 3
Image density
Dark
Set to LIGHTER
Light
Light
Center
Description
Change in density when manual density is set dark 0 to 3
Change in density when manual density is set light 0 to 3
Service Manual
Description
Setting: 0
Setting: 3
Set to DARKER
Density adjustment
Dark
Figure 1-3-17
Setting Initial
range setting
0
0
Setting Initial
range setting
0
0
Y111960-2