Olivetti d-Copia 5200MF Service Manual page 167

2KR/2KS
Section Description
Finisher 89
Jam in center-folding
unit (3000-sheet docu-
ment finisher only)
90
Jam in mailbox (3000-
sheet document fin-
isher only)
1-4-10
Conditions
The centerfold paper entry sensor (CPES) does not turn off
within specified time of centerfold paper conveying sensor
(CPCS) turning on.
The centerfold paper entry sensor (CPES) does not turn on
within specified time of centerfold paper conveying sensor
(CPCS) turning on.
The centerfold paper entry sensor (CPES) is not turned off
within specified time of its turning on.
The centerfold eject switch (CESW) is not turned on within
specified time.
The centerfold eject switch (CESW) is not turned off within
specified time of its turning on.
Centerfold side registration sensor 1 (CSRS1) is not turned
on within specified time.
Centerfold side registration sensor 2 (CSRS2) is not turned
on within specified time.
The home position is not detected within the specified time
after driving the centerfold staple motor (CSTM).
The centerfold paper conveying sensor (CPCS) is not
turned off within specified time.
The centerfold paper conveying sensor (CPCS) is not
turned on within specified time.
The centerfold paper conveying sensor (CPCS) is not
turned off within specified time of its turning on.
The tray eject sensor (TEJS) does not turn on within speci-
fied time from start of paper eject (tray 1).
The tray eject sensor (TEJS) does not turn on within speci-
fied time from start of paper eject (tray 2).
The tray eject sensor (TEJS) does not turn on within speci-
fied time from start of paper eject (tray 3).
The tray eject sensor (TEJS) does not turn on within speci-
fied time from start of paper eject (tray 4).
The tray eject sensor (TEJS) does not turn on within speci-
fied time from start of paper eject (tray 5).
The tray eject sensor (TEJS) does not turn on within speci-
fied time from start of paper eject (tray 6).
The tray eject sensor (TEJS) does not turn on within speci-
fied time from start of paper eject (tray 7).
The tray eject sensor (TEJS) is not turned off within speci-
fied time of its turning on.
Service Manual
Specified time
5373 ms
5373 ms
2313 ms
4080 ms
8200 ms
600 ms
600 ms
1000 ms
1370 ms
1370 ms
2313 ms
5120 ms
4633 ms
4147 ms
3660 ms
3173 ms
2687 ms
2200 ms
Depends on paper
size
Y111960-2