Olivetti d-Copia 5200MF Service Manual page 166

Section Description
Finisher 84
Jam in eject section of
right sub tray (3000-
sheet document fin-
isher only)
85
Jam in eject section of
left sub tray (3000-
sheet document fin-
isher only)
86
Jam in eject section of
internal tray 1 (3000-
sheet document fin-
isher only)
87
Jam in eject section of
inner tray 2 (3000-
sheet document fin-
isher only)
88
Jam in eject section of
main tray (3000-sheet
document finisher only)
Y111960-2
Conditions
Eject switch 2 (ESW2) is not turned off even if a specified
time has elapsed after the machine eject signal was
received.
Eject switch 2 (ESW2) is not turned on even if a specified
time has elapsed after the machine eject signal was
received.
Eject switch 2 (ESW2) is not turned off within specified time
of its turning on.
Eject switch 3 (ESW3) does not turn off within specified
time of paper entry sensor (PES) turning on.
Eject switch 3 (ESW3) does not turn on within specified
time of paper entry sensor (PES) turning on.
Eject switch 3 (ESW3) is not turned off within specified time
of its turning on.
Internal tray entry sensor 1 (ITPES1) is not turned on even
if a specified time has elapsed after the eject signal was
received.
Inner tray entry sensor 2 (ITPES2) does not turn on within
specified time of the paper entry sensor (PES) turning on.
Inner tray entry sensor 2 (ITPES2) does not turn off within
specified time of the paper entry sensor (PES) turning off.
Eject switch 1 (ESW1) is not turned on within specified
time.
At the time of bundle up initial operation, paper conveying
belt home position sensor 1 (PCBHPS1) does not turn on.
At the time of bundle down initial operation, paper convey-
ing belt home position sensor 2 (PCBHPS2) does not turn
on.
At the time of side registration standby operation, side reg-
istration home position sensor 1 (SRHPS1) does not turn
off within specified time.
At the time of side registration standby operation, side reg-
istration home position sensor 2 (SRHPS2) does not turn
off within specified time.
Service Manual
2KR/2KS
Specified time
1209 ms
1209 ms
2313 ms
1426 ms
1426 ms
2313 ms
2070 ms
1322 ms
676 ms
1324 ms
-
-
500 ms
500 ms
1-4-9