Olivetti d-Copia 5200MF Service Manual page 133

2KR/2KS
Maintenance
item No.
Checking/clearing the punch-hole scrap counter
U902
Description
Sets the punch limit and displays and clears the punch-hole scrap count when 3000-sheet document finisher
is installed.
Purpose
Sets the punch limit to notify the user of the time to collect punch-hole scrap. Also, used to manually clear the
punch-hole scrap count if a message requiring collection of punch-hole scrap is shown on the touch panel
after collection. If punch-hole scrap is collected with the machine power turned off, the punch-hole scrap count
is not cleared and consequently this problem occurs.
Setting
1. Press the start key.
2. Select the item.
3. Change the value using the numeric keys.
Display
PUNCH LIMIT (*1000)
PUNCH WASTE
COUNT
The punch limit can be set in increments of 1000.
4. Press the start key. The value is set.
Clearing
1. Enter 0 using the numeric keys.
2. Press the start key. The count is cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Checking/clearing the paper jam counts
U903
Description
Displays or clears the jam counts by jam locations.
Purpose
To check the paper jam status. Also to clear the jam counts after replacing consumable parts.
Method
1. Press the start key.
2. Select the item. The screen for selecting an item is displayed.
Display
Count
Total Count
Method: [Count]
1. Select [Count]. The count of jam code by type is displayed.
Codes for which the count value is 0 are not displayed.
2. Change the screen using the cursor up/down keys.
3. Select the counts for all jam codes and press [ALL CLEAR].
The individual counter cannot be cleared.
4. Press the start key. The count is cleared.
Method: [Total Count]
1. Select [Total Count]. The total number of jam code by type is displayed.
2. Change the screen using the cursor up/down keys.
The total number of jam count cannot be cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-96
Description
Description
Punch limit (maximum number of punching times)
Punch-hole scrap count (current number of punch-
ing times)
Description
Displays/clears the jam counts
Displays the total jam counts
Service Manual
Setting range
0 to 9999000
0 to 9999999
Y111960-2