Making Tenants Paid Up - DigiTech DigiGate-700 User Manual

DigiGate-700 for Windows
™
Figure 3-23
1. After making the selection, Figure 3-20, Page 3-
11, the tenant screen will open with one of two
titles depending on the state of the unit. If the
unit's status is Delinquent, the Make Tenant
Paid Up window will open. Figure 3-23.
NOTE: All information here has been disabled
(you cannot edit any information), the view is
only to let you verify that you have selected the
correct tenant.
2. Click on the OK button if this is the tenant you
want to pay up, or the Cancel button to return
to the Select unit to make delinquent or
paid up window.
3. The Confirm window, Figure 3-24, will open if
DigiGate-700
for Windows
™
- User's Guide
®

Making Tenants Paid Up

®
Figure 3-24
Verify Prompts is set to Yes in the User IDs
setup.
4. Click Yes to make the selected unit paid up, or
No to return to the Make Tenant Paid Up
window.
3 - 13