User Ids - DigiTech DigiGate-700 User Manual

2 - 8
Figure 2-14
1. From the System Setup tab of the Setup
Menu , Figure 2-9, Page 2-5, Click on the
User Ids button.
2. This will open the User IDs window.
Figure 2-14.
3. To add a new user, Click on the Add button.

User IDs

4. This will open the Add a new User ID
window. Figure 2-15.
5. Select the User ID field and enter a new 4
character user name. We have used "JOE1"
here. Figure 2-15.
6. Select the Password field and type in a 4
character password. We have used "1357"
here. Figure 2-15.
7. Click on one of the selections { Yes | No } in
the Verify Prompts radio button set. Figure 2-
15.
NOTE: We strongly suggest that you check the
Yes selection for Verify Prompts . This will
cause a Confirm window (Figure 2-19,
2-10) to appear whenever you have started a
destructive action such as deleting a record, etc.
This gives you a chance to verify that you want
to do this and that it is not an accidental action.
Setting the option to Yes may save having to
re-enter data when it is accidentally deleted.
The Confirm window, will not appear if Verify
Prompts is set to No . It will appear if Verify
Prompts is set to Yes .
Setting Up a New Site
Figure 2-15
DigiGate-700
for Windows
™
Page
®