Define Security Levels; Define User Ids - DigiTech DigiGate-700 User Manual

DigiGate-700 for Windows
™
1. From the Main Menu , Click on the Setup button.
2. This will open the Setup Menu . Click on the System Setup tab then Click on the Security button.
3. Click on the Add button in the Define Security Levels window.
4. In the Add Security Level window, Select the Security Level field and type the two character code
you choose.
5. Next, Click on the Options tab.
6. Click on the check boxes to Select or Deselect each option as preferred.
7. Click on the OK button when all selections are as you want them.
NOTE: See Page 2-6 in Chapter 2.
1. From the System Setup tab of the Setup Menu , Click on the User Ids button to open the User IDs
window.
2. Click on the Add Button.
3. From the Add a new User ID window, Select the User ID field and type in a new 4 character user
name.
4. Select the Password field and type in a 4 character password.
5. Click on one of the selections { Yes | No } in the Verify Prompts radio button set.
6. Select the Security Level list box, then Select the proper security level.
7. Click on the Activity Log tab to display the setup window.
8. In the Display Activity Log radio button set, Click on one of the selections { Yes | No }.
9. If you selected Yes in the Display set, enter the Number of Activities to Display .
10. Enter Number of Seconds to Display . Entering a zero ("0") in this selection will keep the Activity
Log open continuously.
11. Click on OK .
NOTE: See Page 2-8 in Chapter 2.
DigiGate-700
for Windows
™
- User's Guide
®

Define Security Levels

Define User IDs

®
4- 11