DigiGate-700
for Windows
™
Start the DigiGate-700 for Windows program
1.
Click on the DigiWin icon on the desktop or on the Windows 95 Task Bar Click on the Start button.
2.
Select Programs then DigiGate for Windows , or the Program Group you selected during the
installation procedure.
3.
Click on DigiWin which will start the program.
4.
Enter your User ID and Password in the DigiGate Log On window.
5.
Click on the OK button.
NOTE: See Page 2-2 in Chapter 2.
Quit the DigiGate-700 for Windows program
1.
Click on the Close button for any open windows and return to the Main Menu .
2.
At the Main Menu , click on the Exit button to quit the program.
3.
The Confirm window will open asking you to verify your decision.
4.
Click on the Yes button to quit the program or on the No button to abandon the operation and return to
the Main Menu.
NOTE: See Page 3-77 in Chapter 3.
1.
From the Utility Menu with the Data Utilities tab active, Click on the Backup button.
2.
This will open the Microsoft Backup window with a prompt of "Back up: SiteOne," "SiteOne"
being the backup set shipped with the DigiGate-700 for Windows program, and a second line prompt of
"A backup is about to begin, would you like to continue?"
3.
Click on the Yes button in the Microsoft Backup window.
NOTE: The DigiGate-700 for Windows default profile for backup is "SiteOne.SET." The default
backup drive for this profile is the A: floppy drive. The backup file created on the floppy drive is
"SiteOne_xx.Qic," where "xx" is a numeric value denoting the number of the backup file created,
"SiteOne_00.Qic," "SiteOne_01.Qic," etc.
If SiteOne.SET is not present, go to "Chapter 5" and follow the instructions to create a backup set.
NOTE: See Page 3-60 in Chapter 3 and Page 5-2 in Chapter 5 for Windows 95.
See Page 3-60 in Chapter 3 and Page 5-22 in Chapter 5 for Windows 98.
DigiGate-700
for Windows
™
- User's Guide
®
Backup my data
®
4- 3
Need help?
Do you have a question about the DigiGate-700 and is the answer not in the manual?
Questions and answers
what does it mean when we get an error message that says printer not valid