DigiTech DigiGate-700 User Manual page 35

DigiGate-700 for Windows
™
Figure 2-12
8. Next, Click on the Options tab which will
show the screen in Figure 2-12.
9. Click on the check boxes to Select or Deselect
each option as preferred.
NOTE: The Setup Menu allows access to
Security and all configuration settings for the
system. The Setup Menu box should be
unchecked for any user that should not have
access to these options.
10. Click on the OK button when all selections
have been made or the Cancel button to
abandon the Add function.
11. To Edit an existing level, Click on the line you
want to edit, in the Define Security Level
window. Figure 2-10, Page 2-6. The line will
be blue when it is selected.
12. Click on the Edit button.
DigiGate-700
for Windows
™
- User's Guide
®
®
Figure 2-13
13. This will open the Edit Security Level
window. Figure 2-13. This window is the same
as the Add window. Change the information
you want and Click on the OK button to accept
the changes or the Cancel button to discard the
changes.
14. To Delete an existing level, Click on the line
you want to delete in the white portion of the
Define Security Level window. Figure 2-10,
Page 2-6. The line will be blue when it is
selected.
15. Click on the Delete button. You will be asked
to confirm your decision if the Verify
Prompts option has been selected in the User
ID setup.
16. Click on the Yes button to delete the record or
the No button to return to the Edit Security
Level window without deleting the record.
2 - 7