Required Fields; Default Values - DigiTech DigiGate-700 User Manual

B - 6
This section deals with the information you feel is necessary and must be entered into each tenant
or unit record of the system.
First look at "Appendix A, Default Settings & Values." On Page A-4, the "Default Values" chart
shows two sections under "Required Fields." Examine these fields and decide if this information is
necessary for each record in the system.
Do I need to make changes to the values on page A-4? ......................................................................................
If you answered NO, skip this section entirely.
If you answered YES, go to Page 2-11 and follow the instructions for Setting up Required Fields.
This section deals with the information you feel is reasonably consistent among tenants or users of
the system. The information selected here will automatically be entered into each NEW record
added to the tenant database through Move In, or to each NEW user added to the system. This
information may be edited and changed at any time by a user that has access to the respective
section of the DigiGate-700 system. You can also change the Default Values at any time for future
additions to the tenant or user databases.
First look at "Appendix A, Default Settings & Values." The "Default Values" chart on Page A-3 and
Pages 2-12 and 2-13 show the possibilities of setting default values.
Do I want to set default values for tenant or user records? ..................................................................................
If you answered NO, skip this section entirely.
If you answered YES, go to Page 2-12 and follow the instructions for Setting up Default Field Values.

Required Fields

Default Values

Appendix Title
Yes No
___ ___
Yes No
___ ___
DigiGate-700
for Windows
™ ®