System Controller Setup; Time Zones - DigiTech DigiGate-700 User Manual

DigiGate-700 for Windows
™
Figure 2-48
This section deals with technical information about your Site and the way your Gate System will operate.
You may decide that one or two of these are not necessary for your location.
1. Click on the SysCon Setup tab of the Setup
Menu , then Click on the Time Zone button.
Figure 2-48.
DigiGate-700
for Windows
™
- User's Guide
®

System Controller Setup

Time Zones

®
Figure 2-49
2. This will open the Define Time Zones
window. Figure 2-49.
NOTE: The DigiGate-700 for Windows
system ships with two pre-defined Time Zones:
"0" and "1." The zero time zone is fixed and
cannot be modified. Time Zone 0 is for 24
Hr. Access. Time Zone 1 is labeled
Normal Hours and is set for 6 AM to 10 PM.
These times can be modified.
3. To add a new code, Click on the Add button.
Figure 2-49.
2 - 25