Options Setup; Lcd Keypad Option; Editing Custom Messages - DigiTech DigiGate-700 User Manual

DigiGate-700 for Windows
™
Figure 2-92
This section deals with specific options that may be purchased with your DigiGate-700 for Windows system.
If any of these options are included in your system, use the instructions below, in addition to the instructions
in previous sections, to complete the setup of your Site.
The LCD Keypad's display is used to notify your tenants of actions or situations occurring with their entry or
exit of the facility or of a specific message you have for them. In addition to the "Main Screen," there are
preprogramed, default messages to notify the person entering of the status of their actions or their account
condition. These will vary in number depending on the number of LCD Keypads, and the messages needed
for each of them. In addition to these default messages you may enter and control the output of Custom
messages. The Custom messages can be assigned to a specific tenant and set to display only when that tenant
uses a specific LCD Keypad.
The section below is a continuation of the SysCon Setup section on Page 2-25 through 2-29 and deals with
adding, editing, or deleting messages. See "Chapter 3, Operating Instructions," for information on assigning
messages to tenants.
1. From the SysCon Setup tab of the Setup
Menu , Click on the LCD button. Figure 2-92.
DigiGate-700
for Windows
™
- User's Guide
®

Options Setup

LCD Keypad Option

Editing Custom Messages

®
Figure 2-93
2. This will open the Add/Edit LCD Messages
window. Figure 2-93.
3. Click on a line in the list box to make your
selection and then Click on the Edit button.
NOTE: We have used the "Main Screen"
selection here to show you how to edit the text
on the display that will be seen by anyone at the
keypad until they enter a code.
2 - 47