Digigate System Options; Lcd Keypad Option; Assigning Messages At Move In; Assigning Messages In Find/Edit - DigiTech DigiGate-700 User Manual

3 - 82
Figure 3-172
The LCD Option setup (amount of time each message is displayed, the number of times a message will
display for a tenant, and at what keypads the message will display), and the creation of custom messages was
described in the "Options" section of Chapter 2.
This section only deals with assigning messages to specific tenants.
The setups for any message may be modified each time the message is assigned to a tenant, changing the
setup must be done in the setup menu, not here.

Assigning Messages at Move In

1. Click the Move In button on the Main Menu
screen.
2. Select a unit and Click on the OK button.
3. This will open the Move In Tenant window.
Figure 3-172.
4. Click on the Access tab.
5. Open the LCD Message list box to the right of
the Access Number list box.
6. Select one of the messages.
7. When you have completed the move in, Click
on the OK button. The message will display
when the tenant uses the selected keypads for
the number of times set in Count in the Create
new message window, Figure 2-99, Page 2-
50.

DigiGate System Options

LCD Keypad Option

1. Click the Find button on the Main Menu
screen.
2. Select a unit and Click on the OK button.
3. This will open the Find/Edit Unit
Information window. Figure 3-173.
4. Click on the Access tab.
5. Open the LCD Message list box to the right of
the Access Number list box.
6. Select one of the messages.
7. When you have completed your changes, Click
on the OK button. The message will display
when the tenant uses the selected keypads for
the number of times set in Count in the Create
new message window, Figure 2-99, Page 2-
50.
Operating Instructions
Figure 3-173

Assigning Messages in Find/Edit

DigiGate-700
for Windows
™ ®