Access Information; Unit Information - DigiTech DigiGate-700 User Manual

DigiGate-700 for Windows
™
Figure 3-7

Access Information

1. This activates the screen for Access
Information , which is required. Figure 3-7.
2. Enter a unique Access Number and select a
Keypad Zone and a Time Zone from the list
boxes.
3. There are two Misc Options check boxes.
The first allows you to prevent a tenant from
ever being locked out or made delinquent. You
may use this for Management units or for trade
outs for services, etc.
4. The second allows you to Tag a unit.
NOTE: A tagged unit (or tenant) will display as
Tagged on the Activity Log when the tenant
enters or leaves the site. You can use this
feature to denote VIP's or problem tenants. You
may also use this feature for any special
situation where you want to be notified when a
tenant uses the keypads.
5. When you have completed this screen, Click on
the Unit tab.
DigiGate-700
for Windows
™
- User's Guide
®
®
Figure 3-8

Unit Information

1. This will activate a screen for reviewing the unit
information on the new tenant. Figure 3-8.
2. You may Click on the Display Graphics
button to highlight their unit on the Site Monitor
if you have the DigiGraphics option. If the
DigiGraphics option is not installed, the button
will be disabled.
3. When you are finished reviewing the unit
information, Click on the Authorized tab.
*****************************************
NOTE: If you have purchased the LCD
Keypad Option, see the "Options" section at
the end of this chapter for instructions on using
the option.
***************************************
3 - 5