Unit Status - DigiTech DigiGate-700 User Manual

2 - 46
Figure 2-90
1. To modify the unit status, Click on the Unit
Status tab.
2. Select (check) or Deselect (uncheck) the Mark
this unit as damaged check box as needed.
Figure 2-90.
3. Click on the OK button to modify the unit or on
the Cancel button to abandon the operation.

Unit Status

4. This opens the Confirm window with a prompt
of "Modify Unit." Figure 2-91.
5. Click on the Yes button to complete the
modifications or on the No button to abandon
the operation and return to the Modify Unit
Information window.
Setting Up a New Site
Figure 2-91
DigiGate-700
for Windows
™ ®