Menu Tab Details; Status Tab Details - Christie D4K2560 User Manual

Menu tab details

Menu Description
Image Settings Adjust image settings such as color space, sharpness, gamma function, ambient light, and
frame delay.
Lamp Adjust the lamp power, calibrate the lamp, view lamp history and to input new lamp
information when performing a lamp change. Available options:
• Lamp Mode—See
• Lamp Power—See
• Lamp life warning at (hours)—See
• LampLOC—See
• Lamp History—Display the history of all previously installed lamps. (Read-only)
• Change Lamp—See
Configuration Adjust the projected image orientation, colors, and the projector Ethernet settings. Available
options:
• Color Correction—See
• Image Orientation—See
• EDID Window Mode—Inform the source device to split the 4K video raster into two or
four columns instead of four quadrants.
• Diagnostics—Configure diagnostics such as freezing an image and selecting test patterns.
Communications Adjust projector Ethernet settings and set notifications for projector errors. Available options:
• Device name—Set the name of the projector.
• Group name—Set the name of the group the projector belongs to.
• Ethernet Settings—See
• SNMP—See
General Adjust settings such as standby mode, auto power up, and video loop out. Provides current
date and time information

Status tab details

Window Description
Alarms Display the location and the fault condition for any active alarms.
Configuration Display the projector model, serial number, output resolution and date of manufacture.
Cooling Display the status of the liquid cooling module and the cooling fans.
Lamp Info Display the current lamp information, such as: lamp state, hours, type, serial number and
power usage.
Serials Display the serial numbers for all electrical components, such as: main control board,
backplane, image processor, formatter boards and option cards.
Signal Display the status of the four available option card slots.
System Display system hardware control settings, such as: projector hours, pitch/roll, lamp motor
status, lens motor status, and built-in self test.
D4K2560 User Manual
020-101076-04 Rev. 1 (01-2015)
Track lamp intensity with LiteLoc
Adjust lamp power
Add lamp end-of-life indicator
Calibrate the lamp on page 46.
Record new lamp information
Color correction
Select screen image orientation
Set up the ethernet
Send error notifications to specified devices
on page 47.
on page 45.
on page 47.
on page 41.
on page 36.
on page 35.
on page 49.
Menus
on page 47.
52