Connecting A Displayport Video Source; Displayport 1.2 Video Formats - Christie Griffyn Series Installation And Setup Manual

Table of Contents

Advertisement

Format
Cables Frame rate (Hz) Sampling
1920x1080
1
1920x1080
1
1920x1080
1

Connecting a DisplayPort video source

For the projector to accept digital video data, plug the DisplayPort source directly into the Video Input
panel (in the VOM-IF and VOM-HBI Video Input panel images, C shows the DisplayPort 1.2 port and in
the VOM-HBI Video Input panel image, K shows the DisplayPort 1.4 port).
For more details on the VOM-HBI Video Input panel, see Video Input panel (on page 52).
The input configurations listed below are supported.
Input configuration
One-Port
Two-Port
One-Port, Dual-Input 3D

DisplayPort 1.2 video formats

The following image formats are supported by the DisplayPort inputs (C in the VOM-IF and VOM-HBI
Video Input panel images).
In the tables below all 1920x1200 and 3840x2400 formats only apply to Christie M 4K+25 RGB.
In the tables below all 2048x1080 and 4096x1260 formats only apply to Christie Eclipse, Christie
M 4K25 RGB, and Griffyn Series.
Frame rates also include fractional 1/1.001 frame rates.
Christie Griffyn Series Installation and Setup Guide
020-103314-12 Rev. 1 (07-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Connecting devices and establishing communication
24, 25, 30
Y'C'
48, 50, 60
Y'C'
4:4:4(4)
48, 50, 60
Y'C'
4:4:4
Description
Enables connection of one DisplayPort cable. Supports both 2D and 3D frame
sequential transmission format. In this configuration the DisplayPort input supplies
the entire video raster.
Enables connection of two DisplayPort cables. Supports both 2D and 3D frame
sequential transmission format. Each DisplayPort input supplies one of two columns
of a 4K input image.
May be used for Dual-Input 3D configurations.
Bit-depth
C'
/4:2:2(4)
12bpc
B
R
C'
/RGB/
10bpc
B
R
C'
/RGB/
12bpc
B
R
Notes
HD 1080p Y'C'
C'
B
R
component at
3.0Gb/s
(ST 425-1) level A
HD
1080pY'C'
C'
/RGB
B
R
component at
6.0Gb/s
(ST 2081-10)
structure II
HD
1080pY'C'
C'
/RGB
B
R
component at
6.0Gb/s
(ST 2081-10)
mode 2 structure
III
69

Advertisement

Table of Contents
loading

This manual is also suitable for:

Griffyn 4k32-rgbGriffyn 4k35-rgbGriffyn 4k50-rgb

Table of Contents