Connect A Video Source Via Displayport - Christie D4K2560 User Manual

Connect Devices
For limitations of one card use for One-Port Dual-Input 3D, see
Connectivity

Connect a Video Source via DisplayPort

The Twin DisplayPort Input Card (TDPIC) accepts digital video data from the DisplayPort sources.
Various input configurations are supported.
Input
Configuration
Four-Port Enables connection of four DisplayPort cables to two TDPIC cards
(using the 1-IN and 2-IN inputs of two cards in slots 1 and 2, or in
slots 3 and 4). Each DisplayPort input supplies one quadrant of a 4K
input image. This configuration supports high resolution and high
frame rate input video streams, including both 2D and 3D direct
inputs.
Four-Port, Dual- May be used for Dual-Input 3D configurations. For information on the
Input 3D video quadrant mapping for the TDPIC four-point input configuration,
see
Single One-Port Enables connection of one DisplayPort cable to the 1-IN input of a
TDPIC card (any slot). In this configuration the DisplayPort input
supplies the entire video raster.
One-Port, Dual- May be used for Dual-Input 3D configurations.
Input 3D
For limitations of one card use for One-Port Dual-Input 3D, see
Connectivity
24
on page 56 and
Description
Four-Port Input Video Quadrant Mappings
on page 56 and
Mirage Signal Connectivity
on page 26.
Mirage Signal Connectivity
D4K2560 Signal
on page 56.
Requirements
Two TDPIC cards
Four TDPIC cards
One TDPIC card
One or two TDPIC
cards
D4K2560 Signal
on page 56.
D4K2560/ Mirage 4K25 User Manual
020-101076-02 Rev. 1 (11-2013)