Table of Contents
Advertisement
Panasonic Semiconductor Development Company
GCB[3:0]
Specifies the number of times (up to 16) a blank or graphic tile is repeated.
GPRT
Specifies graphics color palette 1 or 2.
0: Palette 1
1: Palette 2
GTC[8:0]
Specifies the address of one of 512 graphic tiles stored in the ROM.
GHP: Graphics Horizontal Position Control Code
GHSZ[1:0]
Specifies the H size of the characters on the next line.
00: 1 dot = 1 VCLK period
01: 1 dot = 2 VCLK periods
10: 1 dot = 3 VCLK periods
11: 1 dot = 4 VCLK periods
GSHT
Specifies shutter operation for the next line. Setting this bit to 1 disables
the shuttering function. You can disable and enable shuttering on a line-by-
line basis.
0: Enable
1: Disable
GHP[9:0]
Specifies a VCLK indicating the horizontal start position for the next line.
1024 steps are available.
GVP: Graphics Vertical Position Control Code
GLAST
Specifies the last line in the internal RAM graphics layer. This resets the
line pointer for graphic tile reads from the internal RAM to the first line.
0: Disable
1: Enable
GVSZ[1:0]
Specifies the V size of the tiles on the next line.
00: 1 dot = 1 H scan line
01: 1 dot = 2 H scan lines
10: 1 dot = 4 H scan lines
11: 1 dot = 6 H scan lines
GINT
Specifies an OSD interrupt.
0: Disable
1: Enable
GVP[9:0]
Specifies an H scan line indicating the vertical start position for the next
line. 1024 steps are available.
168
Panasonic
On-Screen Display
MN102H75K/F75K/85K/F85K LSI User Manual
VRAM
ID Code: 11
ID Code: 11
Advertisement
Table of Contents
