Confirmation Dial - Muratec MFX-3510 User Manual

Confirmation dial

When the confirmation dial function is set, a screen requiring you to reenter the
destination will be displayed at transmission. Transmission is allowed only when the
first and second enter match. Entering the destination twice enables you to check
whether there has been a mistake when entering the number.
There are two types of confirmation settings:
• Confirm Speed-Dial
This will allow you to prevent sending faxes to undesired destinations by mistake, by
reentering the destinations that are entered using the speed dial number and one-touch
keys.
• Confirm Numeric keys
This will allow you to prevent sending faxes to undesired destinations by mistake, by
reentering the fax numbers. When the destination includes a dialing option like pause (/P),
you need to re-enter it exactly as entered previously including the dialing option.
NOTE
When using manual transmission
disabled, even if you set it to ON.
1
Press <Menu>．
2
Press [Setting].
3
Select "Management", and press [Enter].
If an administrator password is set, enter the password and press [Enter].
4
Select "Security Communication", and press [Enter].
5
Select "Confirm Speed-Dial" or "Confirm Numeric keys" you want to set, and
press [Enter].
6
Select "ON" to perform the confirm dial function, and press [Enter].
Select "OFF" to deselect the setting.
7
Press [Close].
4-20 Security fax functions
(page 3-3), the confirmation dial function is