Specifying The Scan Size (Scan Size) - Muratec MFX-3510 User Manual

Specifying the scan size (Scan Size)

You can transmit or save an image scanned using a scan size set in advance. This is
useful when you want to scan a part of the document or to specify the document size.
NOTE
• When you scan using the document glass, only an area from the reference setting
position equal to the set scan size is scanned.
• When you scan using the automatic document feeder, only an area from the
center with a width equal to the set scan size is scanned. The whole length of the
document is scanned.
Document glass
Reference setting position
Half-letter
Reference setting position
A5
1
Press the mode change key to change to scan mode.
2
Press <Advanced>.
3
Select "Scan Size", and press [Enter].
4
Select the scan size, and press [Enter].
If you loaded the document in the automatic document feeder, "Auto" is selected.
5
Specify the destinations, and press <Start>.
For details on the procedure, see
2-6 Advanced scan functions
Automatic document feeder
Reference
setting
position
Letter Legal
Reference
setting
position
A4 F4
"Basic scanning" (page 1-2).
A: Legal / Letter / Half-letter
A: A4 / A5 / F4
A
A