Scanner related settings
Specifying the scan size (Scan Size)
You can transmit an image scanned using a scan size set in advance. This is useful when
you want to transmit a part of the document or want to specify the document size.
NOTE
• When you scan using the document glass, only an area from the reference setting
position equal to the set scan size is scanned.
• When you scan using the automatic document feeder, only an area from the
center with a width equal to the set scan size is scanned. The whole length of the
document is scanned.
Document glass
Reference setting position
Half-letter
Reference setting position
A5
1
Press the mode change key to change to fax mode.
2
Press [Scan Size].
If [Scan Size] is not displayed, press <Advanced> select "Scan Size" [Enter].
3
Select the scan size, and press [Enter].
If you loaded the document in the automatic document feeder, "Auto" is selected.
Automatic document feeder
Reference
setting
position
Letter Legal
Reference
setting
position
A4 F4
A: Legal / Letter / Half-letter
A: A4 / A5
/ F4
Scanner related settings
1
2
3
4
A
A
4-5