Initial Setup (User Install) - Muratec MFX-3510 User Manual

Initial setup (User Install)

In some countries you are required by law to indicate the sender name and fax number
on every fax you send.
YOU MUST THEREFORE STORE THE SENDER NAME AND FAX NUMBER IN
YOUR MACHINE BEFORE USING IT.
Every fax page you send arrives at the receiving machine with a single line of text at
the very top of the page. This text lists a sender name, called the Transmit Terminal
Identifier (TTI), and a fax number.
Under "User install", you can setup the following items including your name and fax
number. These settings can be changed at any time.
Language
Select the language to use.
Current date and time
Set the correct date and time. This setting is applied to all fax operations, such as the
delayed transmission and communication management options.
Automatic daylight saving time detection
Adjust the clock automatically in the summer time period.
Broadcasting
Set the broadcast transmission option.
Communication line
Set the dialing type needed for transmission, either "Tone" or "Pulse". If the wrong
setting is made, telephoning and faxing cannot be performed.
Fax reception mode
Select the desired reception mode from the Fax mode, Tel/Fax mode, Fax/Tel mode,
Answering/Fax mode, or Tel mode options.
For details on the reception modes, see
Dial tone detection
Set the dial tone detection.
Sender name (TTI) registration
This makes it easy to show the sender's name to the receiving party, to print the name
on the document received by the receiving party, and for the receiving party to know
where the document came from. Up to 22 characters can be entered, and three names
can be registered.
Default TTI
The most commonly-used TTI among three possible registered TTIs can be designated
as the default TTI.
Your fax number
The fax number of this machine can be told to the receiving party, or printed on the
document received. Up to 20 digits can be entered.
"Receiving faxes" (page

Initial setup (User Install)

3-15).
7-9
1
2
3
4
5
6
7