Muratec MFX-3510 User Manual page 101

6
Select the destination, and press [Select].
•Fax destinations will not be displayed.
•The selected destinations are displayed with the check mark ( ) on the right. Press [Clear]
to cancel the selection.
•You can select groups when groups are registered. To select groups, press []  [Group],
and then enter the group number.
•You can select destinations using index. To select the destinations using the index, press []
 [Index], and then select the destinations.
7
Press [Close].
8
Enter the name for condition, and press [Enter].
For details on entering the characters, see chapter 1, "Entering characters" in the
Administrator's Guide.
9
Select "Setting", and press [Enter].
10
Select "ON", and press [Enter].
If you select "OFF", the setting is disabled.
11
Select "Priority", and press [Enter].
12
Select the priority level, and press [Enter].
13
Select "Conditions", and press [Enter].
If you do not want to register distribution conditions, proceed to step 16.
14
Enter the conditions, and press [Enter].
4-28 Useful reception function