5
Connect the USB memory to the machine.
6
If you want to set advanced functions such as file format, press <Advanced> and
then set the function as necessary.
For details on the advanced scan function, see
7
Press <Start>.
•When you have loaded the document on the automatic document feeder, this will complete
the operation.
•When you have loaded the document on the document glass, the following message will
appear when the first page of the document is scanned.
8
Load the next document, and press [Scan NextPage].
9
Repeat step 8 to scan all the documents.
To finish scanning, press [Scanning End].
10
When the message "Scan Ready" is displayed, disconnect the USB memory.
1-10
Basic scanning
"Advanced scan functions" (page
2-4).