Broadcasting (Broadcast) - Muratec MFX-3510 User Manual

Broadcasting (Broadcast)

You can transmit to multiple destinations with a single operation. You do not need to
scan the document repeatedly for each individual destination.
NOTE
• USB memory cannot be included into the broadcast destinations.
• If you want to specify destinations using the one-touch key, set the "Broadcast"
setting to ON before using the one-touch key. Specifying destinations using other
than the one-touch key, the "Broadcast" setting will be turned ON automatically
when you specify multiple destinations.
• The number of destinations that can be transmitted to for a single broadcast is
indicated below.
Address book destinations and groups
Manually entered e-mail addresses
Shared folders
FTP servers
„ Using other than the one-touch key
1
Load the document.
2
Press the mode change key to change to scan mode.
3
Press [Select Address].
4
Specify the destination.
For details on specifying the destinations, see the following pages.
•To specify an e-mail, see
•To specify a folder, see
•To specify a FTP, see
5
Repeat step 4 to specify all the destinations.
You can confirm or delete the specified destinations. For details, see
destinations" (page
6
Press <Start>.
•If you loaded the document in the automatic document feeder, this concludes the procedure.
•If you loaded the document on the document glass, the message "Set next document." is
displayed when the loaded documents have been scanned. Load the next document, and
press [Scan NextPage]. Press [Scanning End] to complete scanning.
Destinations
"Scanning to e-mail address" (page
"Scanning to shared PC folders" (page
"Scanning to FTP servers" (page
5-9).
Number
1,000
30
300
20
1-2).
1-4).
1-7).
"Checking specified
Advanced scan functions
1
2
2-9