Muratec MFX-3510 User Manual page 103

„ Printing the distributing condition list
1
Press <Menu>．
2
Press [Setting].
3
Select "List", and press [Enter].
4
Select "Auto Distribute", and press [Enter].
5
Press [Yes].
Press [Paper save] to switch duplex printing ON/OFF.
„ Deleting distributing conditions
1
Press <Menu>．
2
Press [Setting].
3
Select "Register", and press [Enter].
4
Select "Auto Distribute", and press [Enter].
5
Select the distributing condition you want to delete, and press [Delete].
6
When you prompted, press [Yes].
Press [No] to close the screen without deleting.
„ Setting auto distribution
If auto distribution is enabled, the forwarding conditions set individually are enabled and
faxes will be distributed according to the registered conditions.
1
Press the mode change key to change to fax mode.
2
Press <Advanced>.
3
Select "AutoDist.", and press [Enter].
4
Select "ON" to enable auto distribution or "OFF" to disable, and press [Enter].
4-30 Useful reception function