Broadcasting (Broadcast) - Muratec MFX-3510 User Manual

Broadcasting (Broadcast)

This function enables you to transmit the same fax to many destinations in one operation,
thereby eliminating the need to scan and transmit the fax to each individual destination.
NOTE
• When you want to specify destinations using the one-touch key, set the "Broadcast"
setting to ON. When you specify destinations using other than the one-touch keys,
the "Broadcast" setting will be turned ON automatically when you specify multiple
destinations.
• You can specify up to 1,000 fax destinations including both address book destinations
and groups. You can specify up to 30 fax destinations using the numeric keys.
• You can change the default value to always have broadcast transmission enabled. For
details, see "Setting the broadcast transmission option" (page
1
Load the document.
2
Press the mode change key to change to fax mode.
3
Press <Advanced>.
4
Select "Broadcast", and press [Enter].
5
Select "ON", and press [Enter].
6
Specify the destination.
For details on specifying the destinations, see
7
Repeat step 6 to specify all the destinations.
You can confirm or delete the specified destinations. For details, see
destinations" (page
8
Confirm the destination, then press <Start>.
•If you loaded the document in the automatic document feeder, this concludes the procedure.
•If you loaded the document on the document glass, the message "Set next document." is
displayed when the loaded documents have been scanned. Load the next document, and
press [Scan NextPage]. Press [Tx Start Sending] to start transmission.
NOTE
• For details on canceling the transmission, see
3-10).
• When the broadcast function is prohibited by security communication setting
4-21), or when you sending a fax by manual transmission, you cannot use the
broadcast function.
5-9).
7-12).
"Specifying destinations" (page
"Checking specified
"Canceling / Checking faxes" (page
5-2).
(page
Basic faxing 3-5
1
2
3