Muratec MFX-3510 User Manual page 153

Error code
R.1.2 Confirm the remote fax.
Reception error. Remote fax is not
compatible.
Reception error. No passcode
stored on remote fax.
Reception error. Passcode does not
match.
Confirm the remote fax.
Out of paper reception is full.
Confirm the remote fax.
R.2.3 Confirm the remote fax.
R.3.1
R.3.3 Reception was stopped.
R.3.4 Cannot receive at minimum speed.
R.3.6 Some pages were not received
correctly.
R.4.4 Memory overflow.
R.4.1 Inbound document cannot be
received.
R.4.2 Confirm the remote fax.
R.5.1
R.5.2
R.8.1 Cannot send a fax in SuperG3
mode.
R.8.10
R.8.11
8-4 Error messages
Error message Countermeasure
If you know who the sending party is, ask them
to transmit the document again. If this error
continues to occur, contact your authorized
Muratec dealer.
The remote fax could not receive the fax because
the security function is set. For details, see
"Security fax functions"(page
Check the settings on the other party's machine.
A problem such as the machine running out of
paper or a paper jam has cause the maximum
number of documents that can be stored without
printing to be reached. Once the problem such as
the machine running out of paper or a paper jam
has been resolved, the stored documents will be
printed and the machine will be able to receive
documents again.
If you know who the sending party is, ask them
to transmit the document again. If this error
continues to occur, contact your authorized
Muratec dealer.
If you know who the sending party is, ask them
to transmit the document again. If this error
continues to occur, contact your authorized
Muratec dealer.
If you know who the sending party is, request
them to cut the document and transmit it again.
If you know who the sending party is, ask them
to transmit the document again. If this error
continues to occur, contact your authorized
Muratec dealer.
4-14).