Muratec MFX-3510 Printer Manual
  1. Manuals
  2. Brands
  3. Muratec Manuals
  4. Copier
  5. MFX-3510
  6. Printer manual

Muratec MFX-3510 Printer Manual

Hide thumbs Also See for MFX-3510:
Table of Contents

Advertisement

Quick Links

See also: Administrator's Manual , User Manual
Plain-paper digital Fax / Copier / Printer / Scanner
Printer Guide

Advertisement

Table of Contents
loading

Related Manuals for Muratec MFX-3510

Summary of Contents for Muratec MFX-3510

  • Page 1 Plain-paper digital Fax / Copier / Printer / Scanner Printer Guide...
  • Page 2 Chapter 1 Installing the driver Chapter 2 Printing from Windows Chapter 3 Printing from Macintosh Chapter 4 Operating on control panel Chapter 5 Barcode / OCR Font Settings Chapter 6 In this case...

  • Page 3: Table Of Contents

    Contents How to read this manual .....................v Symbols ........................v Key descriptions ......................v Descriptions for paper and documents..............vi Screens ........................vi Chapter 1 Installing the driver Drivers and utilities introduction ................1-2 Drivers and utilities included on the installation disk .........1-2 Supported operating system for the drivers ............1-3 System requirements ....................1-4 Windows environment ....................1-4...
  • Page 4 PDF direct printing ....................2-31 Printing ........................2-31 Printer settings .....................2-32 Chapter 3 Printing from Macintosh Basic printing operation ..................3-2 Canceling printing .....................3-3 Canceling printing on computer ................3-3 Canceling printing on the machine ................3-4 Setting the printer ....................3-5 Displaying the printer settings screen ..............3-5 Feature set: JCL 1 ....................3-6 Feature set: JCL 2 ....................3-7 Feature set: Watermark 1 ..................3-8...
  • Page 5 MSI Plessy ......................5-12 Sample of barcode / OCR font use ................5-13 Chapter 6 In this case Troubleshooting ......................6-2 Cannot install the driver ..................6-2 Cannot print documents ..................6-3 Uninstalling the printer driver ................6-5 For Windows ......................6-5 For Macintosh ......................6-6 Contents...

  • Page 6: How To Read This Manual

    How to read this manual Symbols In this manual, the following symbols are used with the items where important operational and safety information must be observed. Symbol Meaning Describes warnings to protect yourself and others from serious or potentially fatal injury if you handle the machine incorrectly. For safe operation, please follow instructions carefully.

  • Page 7: Screens

    : This shows that the document should be set with the shorter side positioned at the top. Screens This manual uses the screens of the MFX-3510 standard model, unless otherwise stated. The screens you see may differ, depending on the options installed. How to read this manual...
  • Page 8 Chapter 1 Installing the driver Drivers and utilities introduction ................1-2 Drivers and utilities included on the installation disk .........1-2 Supported operating system for the drivers ............1-3 System requirements ....................1-4 Windows environment ....................1-4 Macintosh environment ..................1-5 Installing to Windows ....................1-6 Installing via network connection ................1-6 Using the machine as a shared printer ..............1-10 Installing via local connection ................1-12 Setting up printer options ..................1-17...

  • Page 9: Drivers And Utilities Introduction

    Drivers and utilities introduction Drivers and utilities included on the installation disk Following drivers and utilities are included on the installation disk that is supplied with the machine. In this guide, we describe how to use the printer drivers. To see how to use other drivers and utilities, see the guides mentioned in the table.

  • Page 10: Supported Operating System For The Drivers

    Supported operating system for the drivers You can install the following types of drivers and utilities. Windows 7 Windows XP Windows Server 2008 Mac OS X Item Windows Vista Windows Server 2008 R2 Windows Server 2003 GDI printer driver  ...

  • Page 11: System Requirements

    System requirements Windows environment To use your machine as a printer or a scanner, use a computer meeting the following specifications. Item Specifications Any processor of the same or higher specifications as recommended for your operating system. Windows 7 Home Premium (x86 / x64) Windows 7 Ultimate (x86 / x64) Windows 7 Professional (x86 / x64) Windows 7 Enterprise (x86 / x64)

  • Page 12: Macintosh Environment

    Macintosh environment The system requirements for the installer are as follows. Item Specifications Any processor of the same or higher specifications as recommended for your operating system. Mac OS X (10.2, 10.3, 10.4, 10.5, 10.6, 10.7) Operating System Free hard disk space 10 MB or more Memory Memory capacity as recommended for your operating system.

  • Page 13: Installing To Windows

    Installing to Windows Please read the following instructions to install printer drivers to Windows operating system. When you connect the machine via network, see “Installing via network connection” (page 1-6). When you connect the machine and computer with USB cable, “Installing via local connection”...
  • Page 14 Specify the location to install the utilities, and click [Next >]. •This screen may be displayed, depending on the selected drivers and utilities. •You can click [Browse] to display the folder browsing dialog and specify the installation location. Enter the IP address of the machine to connect to, and click [Next >]. •If you do not know the IP address, you can detect the IP address of connected devices on the “Device Search”...
  • Page 15 „ Setting up user authentication The following screen appears after installing the driver. When you set up user authentication here, authentication user set the printer drivers (except PCL printer driver), and fax driver can be set at one time. “Extended Functions” tab of the printer driver. “Fax Settings”...
  • Page 16 „ Security printing test The following screen appears after installing the driver. To test security printing, click [Security Print test print]. Click [User Authentication], and set up the user authentication. For details, see “Setting up user authentication” (page 1-8). Click [Security Print test print]. Click [OK] to close the confirmation screen.

  • Page 17: Using The Machine As A Shared Printer

    Using the machine as a shared printer If you are going to use the machine as a shared printer on a Windows network with the printer driver installed on a print server, follow the steps below to install the printer driver on the print server and the client computers.
  • Page 18 „ Installing the printer on the client computers NOTE Ask your network administrator for the server name and printer name of the machine on the network. Open the network computer window, and double-click the print server. Double-click the shared printer name. The printer driver will be installed automatically.

  • Page 19: Installing Via Local Connection

    Installing via local connection „ Installing driver • Do NOT connect the USB cable before installing the driver. • You must have administrator privileges in order to install the printer driver. • When you are a Windows 7 or Windows Server 2008 R2 user, please change the Windows setting in advance to installation.
  • Page 20 When the following screen is displayed, connect the computer and the machine with a USB cable. When you are using Windows XP or Windows Server 2003, the “Found New Hardware Wizard” may appear by connecting the USB cable. In such case, see “When found new hardware wizard appears”...
  • Page 21 „ Preparation for Windows 7 and Windows Server 2008 R2 users Before you start the installation, please change the setting of Windows not to download the driver from the web site. If you do not change this setting, installation may take longer time.
  • Page 22 „ Installing printer drivers using the “Add Printer” wizard We recommend you to install the printer drivers using the installer, however install the drivers using the “Add Printer” wizard in following cases: • To install multiple printer drivers on a computer while the computer and printer are connected with USB cable •...
  • Page 23 Click [Browse], and select the folder in the CD-ROM. Then click [Open]. For details on the driver type, see “Drivers and utilities introduction” (page 1-2). •GDI driver location: D:\Drivers\ENU\COMMON\GDI\INSTDATA\Printer\WindowsDriver •PCL 5e driver location: D:\Drivers\ENU\COMMON\PCL\INSTDATA\Printer\5e\WindowsDriver •PCL 6 driver location: D:\Drivers\ENU\COMMON\PCL\INSTDATA\Printer\6\WindowsDriver •PS3 driver location: D:\Drivers\ENU\COMMON\PS3\INSTDATA\Printer\WindowsDriver •Fax driver location: D:\Drivers\ENU\COMMON\FAX\INSTDATA\Printer\WindowsDriver...

  • Page 24: Setting Up Printer Options

    Setting up printer options When the optional devices are attached to your machine, enable these devices. The procedure may slightly vary according to the version of the operating system. In the printers window, right-click your printer icon, then click [Properties]. For Windows 7, right-click your printer icon, then click [Printer Properties].

  • Page 25: Installing To Mac Os X

    •If necessary, enter the location that the printer is installed in the “Location” field. Select “Muratec MFX-3510 PS” in the “Print Using” field, and click [Add]. •For OS X 10.4, select “Muratec” from the pull-down menu in the “Print Using” field, and then select “Muratec MFX-3510 PS”.
  • Page 26 Double-click the CD-ROM and open the folder with the name that has the OS version of your computer. Launch the installer (Muratec MFX-3510 PS.pkg). Follow the instructions in the installer to perform the procedure. After the installation is finished, restart the computer.

  • Page 27: Installing Via A Local Connection

    Select “Muratec MFX-3510 PS” in the “Printer Model” field, and click [Add]. •Select “Muratec” from the pull-down menu in the “Printer Model” field, and then select “Muratec MFX-3510 PS”. •If the driver is not found, select “Other” in the “Printer Model” field, and browse to [Library] ...

  • Page 28: Using The Machine As A Shared Printer

    Using the machine as a shared printer „ Setting up a shared printer server Install the printer drivers on the printer server. For details, see “Installing via network connection” (page 1-18). Select “System Preferences” from menu. Click [Print & Fax]. •For OS X 10.2, 10.3 and 10.4, click [Sharing].
  • Page 29 „ Specifying the client side settings (Mac OS X 10.3) Confirm the printer server name and shared printer name to your network administrator. Select “Applications” from the “Go” menu. Double-click “Utilities”. Double-click the “Printer Setup Utility”. Select a printer to share in the printer list. Click [×] to close the screen.
  • Page 30 Chapter 2 Printing from Windows Basic printing operation ..................2-2 Canceling a print job ....................2-3 Canceling printing on the computer ..............2-3 Canceling printing on the machine ................2-3 Setting the printer ....................2-4 Displaying the printer settings screen ..............2-4 Printer setting screen details .................2-5 Various printing methods ..................2-12 Printing on special paper ..................2-12 Printing on both sides of the paper (Duplex) ............2-15...

  • Page 31: Basic Printing Operation

    Basic printing operation From most application software, you can print by selecting “Print” from the “File” menu. NOTE • The “Print” screen differs according to the application software you are using. • Names in menu or button names differ according to the application software you are using.

  • Page 32: Canceling A Print Job

    Canceling a print job When canceling a print job, first try to cancel it on the computer. If you cannot cancel printing on the computer, cancel it on the machine. NOTE The procedure may slightly vary according to the version of the operating system. This section describes the procedure using Windows 7.

  • Page 33: Setting The Printer

    Setting the printer Displaying the printer settings screen This section describes the procedure for displaying the printer settings screen for setting the printer function. The printer settings screen is displayed by clicking “Properties” or “Preferences” in the print dialog box of the application software or by right-clicking the printer icon on the printers screen of Windows and clicking “Printing Preference”.

  • Page 34: Printer Setting Screen Details

    Printer setting screen details „ Common settings This section describes the items displayed for all tabs. Setting Information Item Description Setting Information Displays current setting. About Click this to display the version information for the driver. Restore Defaults Click this to restore all of the settings on the currently displayed tab to their initial defaults.
  • Page 35 „ “Paper” tab Item Description Copies This specifies the number of copies printed. Paper Settings This specifies settings related to the paper to print on. Document Select the document size from the pull-down menu. Size Orientation This specifies the orientation (portrait / landscape) of the paper to print on. Enlarge / Select either “Zoom”...
  • Page 36 „ “Page Layout” tab Item Description Combine Select the number of document pages to combine from the pull-down menu. Print Separator Select this to print a separator line between each combined page. Line Advanced Click [Advanced] to display the “Layout Settings” dialog. Watermark Select the watermark to print from the pull-down menu.
  • Page 37 „ “Print Quality” tab Item Description Toner Saving Select “On” to restrict toner consumption. Resolution Select the printing resolution. Print Density Set the print density level (between -50 and 50). Advanced Options True Type Font Select the print processing method when using TrueType fonts. Printing PostScript Pass When PostScript Pass Through is enabled, functions such as watermark,...
  • Page 38 „ “Destination” tab Item Description Sort Select “On” to sort the output into copy sets. Output Tray Select a paper output destination. This function is available only when the optional 2-bin tray is equipped. Setting the printer...
  • Page 39 „ “Extended Functions” tab Item Description User Authentication Displays the name of the user that is currently logged in. To change the user, click [Select User], and change the user in the “User Authentication” dialog box. To cancel a user, click [Cancel Selection], and click [OK]. User authentication is required in the following cases: •Using the security printing function •When user login is required by the machine policy setting.
  • Page 40 „ “Other” tab The “Other” tab is displayed on PCL 5e, PCL 6, and GDI printer drivers only. Item Description Enable duplex setting Check this box when you have set duplex printing on the application of the application software but cannot print it correctly. Enable collate setting Check this box when you have set “collate”...

  • Page 41: Various Printing Methods

    Various printing methods Printing on special paper You can print on special types of paper. The following types of paper can be used. • Paste Board • OHP • Envelope / Postcard • Custom size paper NOTE You cannot use “Combine”, “Duplex” and “Booklet” functions when custom size paper is selected.
  • Page 42 Confirm that the “Paper” tab is selected. Select the document size from “Document Size”. Specify the zoom setting, as necessary. Select the paper size from “Paper Size”. When you use custom size paper, register the paper size in advance. For details, see “Registering custom paper settings”...
  • Page 43 „ Registering custom paper settings You can register / edit custom paper sizes. Open the printer settings screen on the computer (page 2-4). Confirm that the “Paper” tab is selected. Click [Custom Paper Settings]. Click [Add] and then specify the paper settings. To change a registered setting, select the custom paper size to change and click [Edit].

  • Page 44: Printing On Both Sides Of The Paper (Duplex)

    Printing on both sides of the paper (Duplex) You can print on both sides of the paper. Left or right binding Upper or lower binding Front Back Front Back NOTE You cannot use custom size paper for duplex printing. Open the printer settings screen on the computer (page 2-4).

  • Page 45: Printing Multiple Pages On One Sheet (Combine)

    Printing multiple pages on one sheet (Combine) A specific number of consecutive pages (two, four, or eight) can be combined and printed on one sheet of paper. [2-up] [4-up] [8-up] NOTE • The zoom ratio is always fixed to auto zoom with the “Combine” function. A user- defined zoom ratio cannot be set.

  • Page 46: Reducing / Enlarging Printing

    Reducing / Enlarging printing „ Fitting the zoom ratio to the paper size You can automatically set the printing zoom ratio according to a specified paper size. This section describes the procedure for printing an half letter size document on letter size paper as an example.
  • Page 47 „ Printing with a custom zoom ratio You can specify the document zoom ratio when printing within 25% to 400%. Open the printer settings screen on the computer (page 2-4). Confirm that the “Paper” tab is selected. Check “Zoom” in “Enlarge / Reduce”, and specify the custom zoom ratio in the entry box.

  • Page 48: Printing With A Margin (Binding Position)

    Printing with a margin (Binding position) You can set the binding position and margin for the paper. You can specify these settings for one side or both sides of the paper. ABCDEFGHIJKL ABCDEFGHIJKL ABCDEFGHIJKL ABCDEFGHIJKL ABCDEFGHIJKL ABCDEFGHIJKL ABCDEFGHIJKL ABCDEFGHIJKL ABCDEFGHIJKL ABCDEFGHIJKL ABCDEFGHIJKL ABCDEFGHIJKL...

  • Page 49: Finishing The Output

    Finishing the output You can sort the sets when outputting multiple print sets. Sort OFF The paper is sorted for each page of the document. Sort ON The paper is sorted for each copy. Open the printer settings screen on the computer (page 2-4).

  • Page 50: Printing A Booklet

    Printing a booklet Use this option for multi-page documents to be printed and stacked to create a booklet when folded in half in the center. NOTE You cannot use custom size paper for duplex printing. Open the printer settings screen on the computer (page 2-4).

  • Page 51: Printing Documents Securely

    Printing documents securely The “Security Printing” function temporarily saves the print data in the memory of the machine, and resumes printing after the user is authenticated by the machine. This enables you to prevent the content of printed documents being read by others before you retrieve the documents.
  • Page 52 Select “On” for “Security Printing”. Click [OK]. The print data is stored in the machine. Click [Print]. Log in to the machine. Press <Log in>  select your user ID  [Enter]  if necessary, enter the password  [Enter]. Start security printing.

  • Page 53: Changing The Print Quality

    Changing the print quality „ Saving toner The toner saving function enables you to adjust toner consumption and lengthen the toner replacement cycle, while retaining the print quality. Open the printer settings screen on the computer (page 2-4). Click the “Print Quality” tab. Select “On”...

  • Page 54: Changing The Resolution

    „ Changing the resolution You can change the resolution (600 × 600 dpi or 300 × 300 dpi) for printing. NOTE If you perform combined printing or reduced printing with the resolution set to “300 × 300 dpi”, the text may appear faint, lines may be difficult to see, or watermarks may not be printed correctly.
  • Page 55 „ Changing the print density You can adjust the density level of the printing result. You can set adjust the density level to 50 levels of lightness or darkness. Lighten Darken up to -50 up to +50 Open the printer settings screen on the computer (page 2-4).
  • Page 56 „ Printing with a computer font You can print a TrueType font as it is displayed on the screen. NOTE • This setting is available on PCL 5e and PCL 6 printer driver or the optional PostScript 3 printer driver. •...

  • Page 57: Printing A Watermark

    Printing a watermark You can overlay a watermark (text printed in the background) when printing data created in application software. You can select a watermark provided by default, or register a new watermark. NOTE This setting is available on PCL 5e and PCL 6 printer driver or the optional PostScript 3 printer driver.
  • Page 58 „ Registering / Editing a watermark You can register, edit, or delete watermarks. Open the printer settings screen on the computer (page 2-4). Click the “Page Layout” tab. Click [Advanced] in “Watermark”. Click [Add]. To change a registered setting, select the custom paper size to change and click [Edit]. Specify the various items in the “Edit Watermark”...
  • Page 59 Item Description Angle Select the angle for the string from the pull-down menu. You can select the following angles for the string: Horizontal / Vertical / Diagonal / User Set If you select “User Set”, you can set a custom angle. (Between -180 and 180 degrees) Position Select “Center”...

  • Page 60: Pdf Direct Printing

    • An optional “PostScript Memory” is required to print PDF files that include JPEG2000 format images. Printing Drag-and-drop the file you want to print to the “Muratec MFX-3510 PDF Printing” shortcut icon on the desktop. The “Muratec MFX-3510 PDF Direct Print” screen is displayed.

  • Page 61: Printer Settings

    Printer settings „ Modifying the Print Setting Double-click the “Muratec MFX-3510 PDF Printing” shortcut icon on the desktop. Specify the print settings. •If you click [Restore Defaults], all the settings return to their default values. •If you click [Apply], the specified settings are applied.
  • Page 62 • Add a Shortcut to the “Send to” Menu On, Off Select this to enable direct printing by selecting “Muratec MFX-3510 PDF Printing” from “Send” in the menu displayed when a PDF file is right-clicked. Installed Options Select this when optional paper cassettes is Not selected by default.
  • Page 63 This page intentionally left blank. 2-34 PDF direct printing...
  • Page 64 Chapter 3 Printing from Macintosh Basic printing operation ..................3-2 Canceling printing .....................3-3 Canceling printing on computer ................3-3 Canceling printing on the machine ................3-4 Setting the printer ....................3-5 Displaying the printer settings screen ..............3-5 Feature set: JCL 1 ....................3-6 Feature set: JCL 2 ....................3-7 Feature set: Watermark 1 ..................3-8 Feature set: Watermark 2 ..................3-9 Various printing methods ..................3-10...

  • Page 65: Basic Printing Operation

    Basic printing operation From most application software, you can execute printing by selecting “Print” from the “File” menu. NOTE The “Print” screen differs according to the application software you are using. Open the data in the application software, and select “Print” from the “File” menu.

  • Page 66: Canceling Printing

    Canceling printing To cancel printing, try to cancel it on computer first. If you cannot cancel printing on computer, cancel it on the machine. NOTE The procedure may slightly vary according to the version of the operating system. This section describes the procedure using Mac OS X 10.5. Canceling printing on computer Select “System Preferences”...

  • Page 67: Canceling Printing On The Machine

    Canceling printing on the machine Press <Menu>. Select “On Line”, and press [Enter]. Select “OFF”, and press [Enter]. Select the print job you want to cancel, and press [Delete]. Select “Yes” to cancel printing. •Printing will be completed for the page that is currently being printed. •Press [No] to continue printing.

  • Page 68: Setting The Printer

    Setting the printer Displaying the printer settings screen The procedure for displaying the printer settings screen for setting the print function is indicated below. Select “Print” from the “File” menu of the application software. Select the driver to use in “Printer”. Select “Printer Features”.

  • Page 69: Feature Set: Jcl 1

    Feature set: JCL 1 Item Description Custom Paper Select this to print on registered custom size paper. Paper Type Select the paper type to print on. Toner Saving Select this to restrict toner consumption. Resolution Select the printing resolution. Print Density Set the print density level (between -50 and +50).

  • Page 70: Feature Set: Jcl 2

    Feature set: JCL 2 Item Description Binding Width(Back) Set the margin on the back (0 to 30 mm). Destination Tray Select a paper output destination. This function is available only when the optional 2-bin tray is equipped. Setting the printer...

  • Page 71: Feature Set: Watermark 1

    Feature set: Watermark 1 Item Description Edit Watermark Select this to overlay a watermark (text printed in the background of the print data) when printing data created in application software. String Select the string to use for the watermark. Font Select the font to use for the watermark string.

  • Page 72: Feature Set: Watermark 2

    Feature set: Watermark 2 Item Description Shading Select the density for the watermark. Print Page If you select “All Pages”, the watermark is printed on all the pages. If you (Only Mac OS X 10.5, select “First Page Only”, the watermark is printed on the first page only. 10.6 and 10.7) Setting the printer...

  • Page 73: Various Printing Methods

    Various printing methods The procedure may slightly vary according to the version of the Macintosh you are using. This section describes the procedure using Mac OS X 10.7. Printing on special paper You can print on special types of paper. The following types of paper can be used.
  • Page 74 Select the paper type to print on in “Paper Type”. Click [Print]. Various printing methods 3-11...

  • Page 75: Printing On A Custom Size Paper

    Printing on a custom size paper NOTE Resister the custom paper size in advance. You can register them either by the following two procedures: • “Paper Size”  “Manage Custom Sizes” in the “Print” dialog box • “Page Setup”  “Paper Size”  “Manage Custom Sizes” in the “File” menu. Load the paper into the bypass tray, and set the paper size you loaded on the machine control panel.

  • Page 76: Printing On Both Sides Of The Paper

    Printing on both sides of the paper You can print on both sides of the paper. NOTE You cannot use custom size paper for duplex printing. Open the printer settings screen on the computer (page 3-5). Click “Two-Sided”. Select “Layout”. Select the binding position from the “Two-Sided”...

  • Page 77: Printing Multiple Pages On One Sheet

    Printing multiple pages on one sheet A specific number of consecutive pages (two, four, six, nine, or 16) can be combined and printed on one sheet of paper. Open the printer settings screen on the computer (page 3-5). Select “Layout”. Select the number to combine from the “Pages per Sheet”...

  • Page 78: Reducing / Enlarging Printing

    Reducing / Enlarging printing „ Fitting the zoom ratio to a paper size You can automatically set the printing zoom ratio according to a specified paper size. This section describes the procedure for printing an half letter size document on letter size paper as an example.
  • Page 79 „ Printing with a custom zoom ratio You can specify the document zoom ratio when printing. NOTE You may be able to specify the zoom ratio on the “Print” screen, depending on the application. Select “Page Setup” from the “File” menu of the application software. Specify a custom zoom ratio in the “Scale”...

  • Page 80: Printing With A Margin

    Printing with a margin You can set the binding position and margin for the paper. You can specify these settings for one side or both sides of the paper. ABCDEFGHIJKL ABCDEFGHIJKL ABCDEFGHIJKL ABCDEFGHIJKL ABCDEFGHIJKL ABCDEFGHIJKL ABCDEFGHIJKL ABCDEFGHIJKL ABCDEFGHIJKL ABCDEFGHIJKL ABCDEFGHIJKL ABCDEFGHIJKL ABCDEFGHIJKL ABCDEFGHIJKL...
  • Page 81 Specify the margin in “Binding Width (Back)”. Click [Print]. 3-18 Various printing methods...

  • Page 82: Finishing The Output

    Finishing the output You can sort the sets when outputting multiple print sets. Sort OFF The paper is sorted for each page of the document. Sort ON The paper is sorted for each copy. Open the printer settings screen on the computer (page 3-5).

  • Page 83: Changing The Print Quality

    Changing the print quality „ Saving toner The toner saving function enables you to adjust toner consumption and lengthen the toner replacement cycle, while retaining the print quality. Open the printer settings screen on the computer (page 3-5). Select “Printer Features”. Select “JCL1”...
  • Page 84 „ Changing the resolution You can change the resolution (600 × 600 dpi or 300 × 300 dpi) for printing. NOTE If you perform combined printing or reduced printing with the resolution set to “300 × 300 dpi”, the text may appear faint, lines may be difficult to see, and watermarks may not be printed correctly.
  • Page 85 „ Changing the print density You can adjust the density level to 50 levels of lightness or darkness. Lighten Darken up to -50 up to +50 Open the printer settings screen on the computer (page 3-5). Select “Printer Features”. Select “JCL1” in “Feature Sets”. Adjust the density in “Print Density”.

  • Page 86: Printing A Watermark

    Printing a watermark You can overlay a watermark (text printed in the background) when printing data created in application software. You can select a watermark that has been prepared in advance. Open the printer settings screen on the computer (page 3-5).
  • Page 87 This page intentionally left blank. 3-24 Various printing methods...
  • Page 88 Chapter 4 Operating on control panel Printing documents saved in USB memory ............4-2 Setting the print controller ..................4-4 Setting procedure ....................4-4 List of print controller settings ................4-4 Setting the auto deletion time .................4-6...

  • Page 89: Printing Documents Saved In Usb Memory

    NOTE • You can print a file up to 20 MB in size. • PDF and TIFF files that were scanned and saved with Muratec machine in black and white format can be printed. • When the optional “PostScript Enabler” is installed, you can print color PDF document.
  • Page 90 Set the print settings as necessary. •To set the print settings, select item you want to set and then press [Enter]. Set the setting then press [Enter]. •When you set the bypass tray for paper source, specify the paper size you are going to load on the bypass tray.

  • Page 91: Setting The Print Controller

    Setting the print controller NOTE • This setting is used only when you cannot specify the settings on the printer drivers. When settings are available on printer drivers, those settings will be used. • This setting is displayed only for PCL 5e or 6 printer drivers is installed. Setting procedure Press <Menu>.
  • Page 92 Function Description Settings Font Set the font to use for printing. Courier, CG Times, LetterGothic, CG Omega, Coronet, NwCentSchlbk, ITCAvantGard, Clarendon, Universe, AntiqOlive, Garamond, Marigold, Albertus, Arial, Symbol, TimesNewRmn, CourierPS, Helvetica, Palatino, ITCBookman, Times, Windings, ZapfChancery, ZapfDingbats, SymbolPS Symbol Set Set the symbol set for the font.

  • Page 93: Setting The Auto Deletion Time

    Setting the auto deletion time You can set the time until stored security print documents are automatically deleted. Press <Menu>. Press [Setting]. Select “Default Setting”, and press [Enter]. Select “Printer Settings”, and press [Enter]. Select “Security print auto-delete”, and press [Enter]. Enter the automatic deletion time, and press [Enter].
  • Page 94 Chapter 5 Barcode / OCR Font Settings About barcode and OCR fonts .................5-2 Precautions for use ....................5-2 Types of barcode / OCR fonts ..................5-3 Barcode / OCR font calling and available parameters ..........5-4 Character code list .....................5-6 UPC / EAN .......................5-6 Interleave25 ......................5-7 Code39 ........................5-8 Codabar (NW-7) .......................5-8...

  • Page 95: About Barcode And Ocr Fonts

    About barcode and OCR fonts This chapter provides descriptions for types of barcode, character code and samples of font usage, etc. for models equipped with the Barcode / OCR font option. The content of this chapter assumes the reader has a basic understanding of barcodes and barcode standards.

  • Page 96: Types Of Barcode / Ocr Fonts

    Types of barcode / OCR fonts The internal code for the barcode fonts is coded in the barcode symbologies listed below. In general, assign a barcode font and data that is going to be expressed based on the ASCII character set. However, be aware that the internal code for fonts may at times be encoded using code that is different from ASCII code.

  • Page 97: Barcode / Ocr Font Calling And Available Parameters

    Postnet (ZIP) Postnet (ZIP) is a barcode represented as postal code for the United States (ZIP code). The check digit is modulus 10. Postnet font consists of numerals (ASCII) contained within Framebars (*: Hex2A and }: Hex7C). Codabar (NW-7) Codabar (NW-7) is a barcode represented in numerals and symbols ($, +, -, ., /.). Most standards do not define a check digit.
  • Page 98 24631 EAN / JAN-13 +2 24632 EAN / JAN-13 +5 24640 Interleaved 2 of 5 24641 Interleaved 2 of 5 CHK 24670 Code 39 (3of9) 24671 Code 39 + CHK 24672 Code 39 (3of9) encode space before data 24673 Code 39 + CHK encode space before data 24702 Code 128 B 24704...

  • Page 99: Character Code List

    Character code list List the character codes used when assigning the Barcode character. UPC / EAN A character code that is used when printing the Barcode Character for UPC / EAN. Character code Left side odd parity Left side even parity Right side even parity Character ASCII...

  • Page 100: Interleave25

    Interleave25 A character code that is used when printing the Barcode Character for Interleave25. Character code Character code Character code Character Character Character ASCII ASCII ASCII notation notation notation notation notation notation " & < > Start Stop NOTE Assign two character sets for the bar character and space character by a single character code.

  • Page 101: Code39

    Code39 A character code that is used when printing the Barcode Character for Code39. Character code Character code Character code Character Character Character ASCII ASCII ASCII notation notation notation notation notation notation Codabar (NW-7) A character code that is used when printing the Barcode Character for Codabar (NW-7). Character code Character code Character code...

  • Page 102: Code128

    Code128 A character code that is used when printing the Barcode Character for Code128. Character Character code Numeric value Code A Code B Code C HEX notation ASCII notation " " " & & & < < < > > >...
  • Page 103 Character Character code Numeric value Code A Code B Code C HEX notation ASCII notation 5-10 Character code list...

  • Page 104: Postnet (Zip)

    Character Character code Numeric value Code A Code B Code C HEX notation ASCII notation FNC3 FNC3 FNC2 FNC2 SHIFT SHIFT CODE C CODE C CODE B FNC4 CODE B FNC4 CODE A CODE A FNC1 FNC1 FNC1 START (CODE A) START (CODE B) START (CODE C) STOP...

  • Page 105: Msi Plessy

    MSI Plessy A character code that is used when printing the Barcode Character for MSI Plessy. Character code Character HEX notation ASCII notation Start < Stop > 5-12 Character code list...

  • Page 106: Sample Of Barcode / Ocr Font Use

    Sample of barcode / OCR font use The surrounding blank area and caption are not included in the following example. Escape code <ESC> and carriage return code <CR> are required for code value input. The value of nn is a hexadecimal digit for items listed as <Hexnn>. Input for the corresponding code is required.
  • Page 107 Codabar Data to be displayed A19+1243B (Check Digit :) <ESC>(5Y<ESC>(s12vbs24750TA1941243:B<CR> MSI Plessy Data to be displayed 1234567 (No Check Digit) <ESC>(6Y<ESC>(s12vbs24760T<1234567><CR> OCR-A Data to be displayed 12345ABCDE <ESC>(0O<ESC>(s12vbs104T12345ABCDE<CR> OCR-B Data to be displayed 12345ABCDE <ESC>(1O<ESC>(s12vbs110T12345ABCDE<CR> 5-14 Sample of barcode / OCR font use...
  • Page 108 Chapter 6 In this case Troubleshooting ......................6-2 Cannot install the driver ..................6-2 Cannot print documents ..................6-3 Uninstalling the printer driver ................6-5 For Windows ......................6-5 For Macintosh ......................6-6...

  • Page 109: Troubleshooting

    Check whether the CD-ROM can be read in installation CD-ROM? the Explorer of Windows. If there is a problem with the installation disk, contact your authorized Muratec dealer. Did you perform the Check the list of supported operating systems. installation in a supported For details, see “System requirements”...

  • Page 110: Cannot Print Documents

    Cannot print documents Status Things to check Countermeasure Cannot print Have you checked the See chapter 4, “Cannot connect to documents network environment? the network” in “Troubleshooting” in Administrator’s Guide to check the network environment. Is paper loaded? Load the paper properly. For details, see “Loading Paper”...
  • Page 111 You may print them correctly when the Cannot print PDF documents correctly Memory attached? optional PostScript Memory is attached. using Muratec MFX- 3510 PDF Direct Are the fonts embedded in When the characters are garbled, you may Print or operating...

  • Page 112: Uninstalling The Printer Driver

    Uninstalling the printer driver For Windows This section describes the procedure using Windows 7. The procedure may slightly vary according to the version of the operating system. You must have administrator privileges in order to uninstall the printer driver or utilities. Select [Control Panel] from [Start] menu.

  • Page 113: For Macintosh

    Close the [Print & Fax] window. NOTE You can delete the files installed by using the “Muratec MFX-3510 PS.pkg” when you double-click the “uninstall_M3510” (or “uninstall_M3510.command” for 10.2, 10.3, and 10.4) file on the installation disk. To delete, open the folder with the name of your operating system version, and then double-click “uninstall M3510”...
  • Page 114 Muratec America, Inc. 3301 East Plano Parkway, Suite 100 Plano, Texas 75074 http://www.muratec.com © 2012 MURATA MACHINERY, LTD.

Table of Contents