Selecting Destination From The History - Muratec MFX-3510 User Manual

Selecting destination from the history

„ Using dialing history (Redial)
When transmitting a fax, you can select a destination from the history of the last 10
destinations entered using the numeric keys. You can also edit the selected history before
using it as a destination.
NOTE
Transmission using destinations registered in the address book are not displayed in
the dial history.
1
Press the mode change key to change to fax mode.
2
Press the upper cursor key.
3
Select the destination you want to specify, and press [Enter].
4
To change the fax number, edit the number, and press [Enter].
To use the displayed fax number as it is, press [Enter] without editing it.
5
When there are multiple destinations, repeat the procedures from step 2.
Specifying destinations
1
2
3
4
5
5-7