Muratec MFX-3510 User Manual page 36

„ Using a registered file name
1
Press the mode change key to change to scan mode.
2
Press <Advanced>.
3
Select "File Name", and press [Enter].
4
Press [], and then [File Name].
5
Select the file name you want to use, and press [Enter].
6
Edit the file name as necessary, and press [Enter].
If you do not want to edit it, proceed to the next step.
7
Specify the destinations, and press <Start>.
For details on the procedure, see "Basic scanning" (page 1-2).
Advanced scan functions
1
2
2-13