Checking the transmission report
You can print or e-mail the transmission results of faxes.
NOTE
You can also set to always print a transmission report. For details, see
default fax settings " (page 7-21).
Issuing the transmission report
1
Load the document.
2
Press the mode change key to change to fax mode.
3
Press <Advanced>.
4
Select "Tx Report", and press [Enter].
5
Select the method for checking the transmission result, and press [Enter].
If you selected "OFF" or "Print", press [Enter] and proceed to step 7.
6
If you selected "e-mail", specify the destination for transmission report, and
press [Enter].
•Up to 50 characters can be entered.
•To delete one of the entered characters, press [Clear].
7
Specify the destinations, and press <Start>.
For details on specifying the destinations, see
NOTE
You can change the transmission report settings while scanning. Press [Tx Report] on
the screen displayed while scanning. Continue the procedure from step 5.
6-2
Checking the transmission report
"Specifying destinations" (page
"Specifying
5-2).