Muratec MFX-3510 User Manual page 42

„ Adjusting the RGB
You can set the ratio of R (red) to seven different levels, from -3 to +3.
–: Lessens red, and enhances cyan.
+: Enhances red, and lessens cyan.
-3 -2
You can set the ratio of G (green) to seven different levels, from -3 to +3.
–: Lessens green, and enhances magenta.
+: Enhances green, and lessens magenta.
-3 -2
You can set the ratio of B (blue) to seven different levels, from -3 to +3.
–: Lessens blue, and enhances yellow.
+: Enhances blue, and lessens yellow.
-3 -2
1
Press the mode change key to change to scan mode.
2
Press <Advanced>.
3
Select "Color Adjust", and press [Enter].
4
Select "RGB", and press [Enter].
-1 0 +1
-1 0 +1
-1 0 +1
+2 +3
+2 +3
+2 +3
Advanced scan functions
1
2
2-19