9
Select "E-mail Address", and press [Enter].
10
Enter the e-mail address, and press [Enter].
•For details on entering the characters, see chapter 1, "Entering characters" in the
Administrator's Guide.
•When you have not entered fax number in step 6, the next step will be step 8.
11
Select "Super G3", and press [Enter].
12
Select "ON" to enable transmission with Super G3 or "OFF" to disable it, and
press [Enter].
13
Press [Close].
To continue to register or edit address book destinations, repeat the procedures from step 5.
Useful registration method 1
Registering into an unregistered one-touch key
1
Press the mode change key to change to scan or fax mode.
2
Press an unregistered one-touch key.
3
Press [Yes].
4
The procedure is then the same as for registering an address book destination.
Continue from step 6 of
7-4
Registering destinations
" Registering or editing destinations" (page 7-3).