Setting The Dial Tone Detection - Muratec MFX-3510 User Manual

„ Setting the dial tone detection
Select ON if you want to set the dial tone detection. When you set to ON, you cannot
transmit the faxes through a line that cannot acquire a dial tone. Normally, select OFF.
1
Open the user install screen
2
Select "Dial Tone Detect", and press [Enter].
3
Select "ON" or "OFF", and press [Enter].
„ Registering your name or company name (TTI)
You can register three TTI's (Transmit Terminal Identifier).
1
Open the user install screen
2
Select "TTI Enter/Edit", and press [Enter].
3
Select "TTI 1", and press [Enter].
4
Enter the sender name (your name or company name), and press [Enter].
•You can enter up to 22 characters for the sender name.
•For details on entering the characters, see chapter 1, "Entering characters" in the
Administrator's Guide.
5
To register TTI 2 and TTI 3, select "TTI 2" or "TTI 3" in step 3, and repeat step 4.
(page 7-10).
(page 7-10).
Initial setup (User Install)
1
2
3
4
5
6
7
7-13