Operations During Reception - Muratec MFX-3510 User Manual

Operations during reception

„ Indicators during reception
The information lamp on the control panel flashes green during reception.
If the other party has registered their name and fax number in their machine, that
information is displayed on the fax ready screen.
The display is in the following order of priority.
1 The other party's name (When the other party uses our products)
2 The other party's fax number
3 Blank (When no name and fax number are registered in the other party's machine.)
NOTE
• Do not pull out the paper cassette during printing. This may cause a paper jam.
• Reception will be canceled if the memory becomes full during reception. Contact the
other party and ask them to transmit the fax again.
• Make sure that too much paper does not accumulate in the paper output tray. This
may make it difficult for paper to be output, and cause a paper jam.
„ Out-of-paper reception
Out-of-paper reception is a function that stores the received document in memory when
paper has run out. When the problem preventing the document from being printed is
resolved, the stored document is automatically printed.
When out-of-paper reception is performed, the information lamp illuminates green.
NOTE
• When the memory becomes full during memory reception, the fax reception will
be canceled and an error message is displayed. When the problem preventing the
document from being printed is resolved, the portion of the received document that
could be stored will be printed. Contact the other party and ask them to transmit
the fax again.
• When the machine has not enough memory, you cannot receive faxes. Clear the
memory by printing out documents or in other ways.
• If printing cannot be performed due to a device error such as a paper jam or running
out of paper, the information lamp illuminates red.
3-18 Basic faxing