Delayed Transmission (Delayed Tx) - Muratec MFX-3510 User Manual

Delayed transmission (Delayed Tx)

You can use this function to specify the date and time to send the fax.
• You can specify a time and date up to a month ahead. The document for delayed
transmission is stored in memory until the specified time, at which point transmission
will start.
• If real time transmission is specified, the document will remain loaded until the
specified time, so you will not be able to copy, scan, or transmit other faxes.
• This function can be also specified in combination with other functions (such as
broadcasting, etc.).
1
Press the mode change key to change to fax mode.
2
Press <Advanced>.
3
Select "Delayed Tx", and press [Enter].
4
Press [PM] or [AM] and enter the transmission date and time, and press [Enter].
•Enter the time in 12 hour format.
•You can use the cursor key and numeric keys.
5
Specify the destinations, then press <Start>.
For details on specifying the destinations, see
NOTE
• After scanning the document, you can check or delete the reserved transmission by
pressing <Job Confirm.  Fax Cancel>
• To change the specified time after scheduling the transmission, you need to delete
the delayed transmission and then set transmission date again.
"Specifying destinations" (page
(page 3-11).
Transmission related settings
4
5-2).
4-11
1
2
3