Setting The Fax Reception Mode - Muratec MFX-3510 User Manual

„ Setting the broadcast transmission option
Select whether to start transmission when registered destination is selected ("OFF"), or
when <Start> is pressed with all destinations selected ("ON").
NOTE
The broadcast setting is enabled for both scan to e-mail and fax transmission.
1
Open the user install screen
2
Select "Broadcast", and press [Enter].
3
Select "ON" or "OFF", and press [Enter].
„ Setting communication line
Set the dialing type needed for the fax machine, either "Tone" or "Pulse".
1
Open the user install screen
2
Select "Communication Line", and press [Enter].
3
Select the dialing type, and press [Enter].
„ Setting the fax reception mode
Select the reception mode that best matches the machine usage.
1
Open the user install screen
2
Select "Fax Reception Mode", and press [Enter].
3
Select the reception mode, and press [Enter].
7-12 Initial setup (User Install)
(page 7-10).
(page 7-10).
(page 7-10).