Muratec MFX-3510 User Manual page 76

Broadcast transmission (Broadcast)
This function enables you to transmit the same fax to many destinations in one operation,
thereby eliminating the need to scan and transmit the fax to each individual destination.
See "Broadcasting (Broadcast)" (page 3-5).
TTI
You can select from three types of sender names registered in advance. You can also
transmit without adding a sender name
Dialing options (Dialing Opt.)
See "Dialing options" (page 3-8).
Transmission confirmation report (Tx Report)
See "Checking the transmission report" (page 6-2).
Next document setting (Next Doc.)
If you need to transmit a large volume of documents that cannot all fit into the automatic
document feeder at once, turn "Next Doc" on to divide scanning. You can scan both
through the automatic document feeder and on the document glass
Security reception (Security Rx)
If security reception is set, documents received after the specified security reception
starting time are stored in memory and not printed. Since it is necessary to enter a
passcode to print the documents, this prevents received documents from being taken
away (page 4-22).
ID check transmission (ID Check)
ID check transmission limits fax transmission to when the lower four digits of the fax
number you dialed and those registered in the destination machine match
Closed transmission (Closed Tx)
When closed transmission is set, fax messages cannot be transmitted to machines other
than this product. If a passcode is set, faxes can only be transmitted to machines that are
the same product that have the same passcode registered
E-mail gateway (E Gateway)
You can transmit to a fax server as if you were transmitting to a regular telephone line.
See "E-mail gateway (E Gateway)" (page
Location
You can check or delete the specified destinations at transmission. See
specified destinations manually" (page 5-10).
Confirmation dial
When the confirmation dial function is set, a screen requiring you to reenter the
destination will be displayed before starting transmission. Transmission is allowed only
when the first and second numbers match. Entering the destination twice enables you
check whether there has been a mistake when entering the number. This prevents faxes
from being transmitted to the wrong destination by mistake
(page 4-12).
(page
4-13).
(page
Introduction to advanced functions
(page 4-6).
(page 4-18).
4-14).
"Checking
4-20).
4-3
1
2
3
4